CCNA 1 Final 2012 Exam Answers – Set-2

1. When must a router serial interface be configured with the clock rate command?
when the interface is functioning as a DTE device
when the interface timers have been cleared
when the connected DTE device is shut down
when the interface is functioning as a DCE device
2. Due to a security violation, the router passwords must be changed. What information can be learned from the following configuration entries? (Choose two.)
Router(config)# line vty 0 3 
Router(config-line)# password c13c0
Router(config-line)# login
The entries specify three Telnet lines for remote access.
The entries specify four Telnet lines for remote access. 
The entries set the console and Telnet password to “c13c0″.
Telnet access will be denied because the Telnet configuration is incomplete.
Access will be permitted for Telnet using “c13c0″ as the password.

3. Which of the following are the address ranges of the private IP addresses? (Choose three.) 
10.0.0.0 to 10.255.255.255 
200.100.50.0 to 200.100.25.255
150.150.0.0 to 150.150.255.255
172.16.0.0 to 172.31.255.255 
192.168.0.0 to 192.168.255.255 
127.16.0.0 to 127.31.255.255
4. Which password is automatically encrypted when it is created?
vty
aux
console
enable secret 
enable password
host-a
5. Refer to the exhibit. A network technician is trying to determine the correct IP address configuration for Host A. What is a valid configuration for Host A?
IP address: 192.168.100.19; Subnet Mask: 255.255.255.248; Default Gateway: 192.16.1.2
IP address: 192.168.100.20; Subnet Mask: 255.255.255.240; Default Gateway: 192.168.100.17 
IP address: 192.168.100.21; Subnet Mask: 255.255.255.248; Default Gateway: 192.168.100.18
IP address: 192.168.100.22; Subnet Mask: 255.255.255.240; Default Gateway: 10.1.1.5
IP address: 192.168.100.30; Subnet Mask: 255.255.255.240; Default Gateway: 192.168.1.1
IP address: 192.168.100.31; Subnet Mask: 255.255.255.240; Default Gateway: 192.168.100.18
CCNA 1 Final Exam
6. Refer to the exhibit. What function does router RT_A need to provide toallow Internet access for hosts in this network?
address translation 
DHCP services
ftpd
web server
7. Which prompt represents the appropriate mode used for the copy running-config startup-config command ?
Switch-6J>
Switch-6J# 
Switch-6J(config)#
Switch-6J(config-if)#
Switch-6J(config-line)#
CCNA 1 Final Exam
8. Refer to the exhibit. A technician is working on a network problem that requires verification of the router LAN interface. What address should be pinged from this host to confirm that the router interface is operational?
127.0.0.1
192.168.64.196
192.168.254.1 
192.168.254.9
192.168.254.254
CCNA 1 Final Exam
9. Refer to the exhibit. The tracert command is initiated from PC1 to PC4. Which device will send a response to the initial tracert packet from PC1?
Athens
Ankara
London
Paris
PC4
10. Which information is used by the router to determine the path between the source and destination hosts?
the host portion of the IP address
the network portion of the IP address 
host default gateway address
the MAC address
CCNA 1 Final Exam
10. Refer to the exhibit. A PC is communicating with another PC on a remote network. The two networks are connected by three routers. Which action will help to identify the path between the hosts?
Use the ipconfig command at the host.
Use the ipconfig/all command at the destination.
Use the tracert command at the host. 
Use the ping command at the destination.
CCNA 1 Final Exam
11. Refer to the exhibit. The diagram represents the process of sending e-mail between clients. Which list correctly identifies the component or protocol used at each numbered stage of the diagram?
1.MUA 2.MDA 3.MTA 4.SMTP 5.MTA 6.POP 7.MDA 8.MUA
1.MUA 2.POP 3.MDA 4.SMTP 5.MTA 6.MDA 7.SMTP 8.MUA
1.MUA 2.POP 3.SMTP 4.MDA 5.MTA 6.SMTP 7.POP 8.MUA
1.MUA 2.SMTP 3.MTA 4.SMTP 5.MTA 6.MDA 7.POP 8.MUA
CCNA 1 Final Exam
12. Refer to the exhibit. The router of the company failed and was replaced. After the replacement, hosts C and D in the Education office are able to ping each other, but they are unable to access the hosts in the Accounts office. What is the likely cause of the problem?
The IP address at the fa0/0 interface of the router is incorrectly configured.
The subnet mask at the fa0/1 interface of the router is incorrectly entered. 
The IP address at the serial interface of the router is incorrectly configured.
The hosts in the Accounts office are not on the same subnet as the hosts in the Education office.
CCNA 1 Final Exam
13. Refer to the exhibit. Host A and B are unable to communicate with each other. What is the reason for this?
Host A is assigned a network address.
Host B is assigned a multicast address.
Host A and host B belong to different networks.
The gateway addresses are network addresses.
CCNA 1 Final Exam
14. Refer to the exhibit. Host B attempts to establish a TCP/IP session with host C. During this attempt, a frame was captured at the FastEthernet interface fa0/1 of the San Francisco router. The packet inside the captured frame has the source IP address 10.10.1.2, and the destination IP address is 10.31.1.20. What is the destination MAC address of the frame at the time of capture?
0060.7320.D632
0060.7320.D631
0040.8517.44C3
0009.B2E4.EE03
0010.C2B4.342
CCNA 1 Final Exam
15. Refer to the exhibit. While configuring a network, a technician wired each end of a Category 5e cable as shown. Which two statements are true about this setup? (Choose two.)
The cable is suitable for connecting a switch to a router Ethernet port. 
The cable is suitable for connecting dissimilar types of devices. 
The cable is unusable and must be rewired.
The cable is terminated in a way that the transmit pin is wired to the receive pin.
The cable simulates a point-to-point WAN link.
CCNA 1 Final Exam
16. Refer to the exhibit. Host A sends a frame with the destination MAC address as FFFF.FFFF.FFFF. What action will the switch take for this frame?
It will drop the frame.
It will send the frame back to host A.
It will send the frame to all hosts except host A. 
It will forward the frame to the default gateway.
17. Well-known services and applications use which range of TCP/UDP port numbers?
0 to 255
0 to 1023
1024 to 49151
49152 to 65535
18. Which three IPv4 addresses represent subnet broadcast addresses? (Choose three.)
192.168.4.63 /26 
192.168.4.129 /26
192.168.4.191 /26 
192.168.4.51 /27
192.168.4.95 /27 
192.168.4.221 /27
19. Which three statements are true about network layer addressing? (Choose three.)
The addresses are 48 bits long.
Network layer addressing is used by Ethernet switches to make forwarding decisions.
It uses a hierarchical structure.
It does not support broadcasts.
It uniquely identifies each host.
A portion of the address is used to identify the network.
20. Which OSI layer addressing is required to route packets between two networks?
Layer 1
Layer 2
Layer 3 
Layer 4
21. What type of network is maintained if a server takes no dedicated role in the network?
mainframe
client/server
peer-to-peer 
centralized
CCNA 1 Final Exam
22. Refer to the exhibit. Host A is requesting a web page from the web server. Which option represents the socket to which the request is made?
80
http://www.cisco.com
10.0.0.130
10.0.0.130:80
23. A routing issue has occurred in your internetwork. Which of the following type of devices should be examined to isolate this error?
access point
host
hub
router
switch
CCNA 1 Final Exam
24. Which statement describes the correct use of addresses to deliver an e-mail message from HostB to the e-mail service that is running on ServerA?
HostB uses the MAC address of ServerA as the destination.
Router B uses a Layer 3 network address to route the packet. 
Router A uses the Layer 4 address to forward the packet to Router B.
Via the use of a Layer 3 address, ServerA assigns the message to the e-mail service.
CCNA 1 Final Exam
25. Refer to the exhibit. Host A is configured with the correct IP address for the default gateway of the router R1 FastEthernet0/1 interface. How will a packet that is sent from host A to host B be handled by the devices on the network?
R1 will drop the packet because R1 does not have a specific route in its routing table to the 10.1.1.0/24 network.
R1 will forward the packet to its default gateway, the next hop router R2. R2 will forward the packet to the directly connected network 10.1.1.0/24.
R1 will forward the packet to its default gateway, the next hop router R2. R2 will drop the packet because it does not have a default route to network 10.1.1.0/24.
R1 will forward the packet to its default gateway, the next hop router R2. R2 will drop the packet because it does not have a route that is learned by a routing protocol to network 10.1.1.0/24.
26. Which option correctly identifies the interface or interfaces used to connect the router to a CSU/DSU for WAN connectivity?
This correct answer is image 4 ( last image ).
CCNA 1 Final Exam
CCNA 1 Final Exam
CCNA 1 Final Exam
CCNA 1 Final Exam
CCNA 1 Final Exam
27. Refer to the exhibit. Host A is unable to reach host B on the remote network. A technician attempted to ping the local gateway and the ping was successful. To verify the host configuration, the technician issued the ipconfig command. What is the likely cause of the problem?
The local NIC is incorrectly configured.
The subnet mask on host A is incorrectly configured.
The IP address on host A is incorrectly configured.
The default gateway on host A is incorrectly configured.
28. A network administrator is configuring several switches for a network. The switches have similar configurations and only minor differences. The administrator wants to save all commands that are issued on the first switch to a text file for editing. Which transfer option should be selected in HyperTerminal?
Correct answer is image tree (3).
CCNA 1 Final Exam
CCNA 1 Final Exam
CCNA 1 Final Exam
CCNA 1 Final Exam
29. How many host addresses may be assigned when using the 128.107.0.0 network address with a subnet mask of 255.255.248.0?
30
256
2046
2048
4094
4096
30. Which application layer protocol allows administrators to log into a server from remote locations and control a server as though logged in locally?
DNS
FTP
DHCP
SMTP
Telnet
31. During the encapsulation process, what is the PDU of the internet layer?
bit
data
frame
packet
segment
32. Which service is used when the nslookup command is issued on a computer?
FTP
DNS 
DHCP
Telnet
CCNA 1 Final Exam
33. Refer to the exhibit. A network technician creates equal-sized subnets of network 192.168.2.0/24 using the subnet mask 255.255.255.224. If the technician wishes to calculate the number of host addresses in each subnet by using the formula that is shown in the exhibit, what value will be used for n?
1
2
3
4
5
34. What are the default terminal emulation software settings when configuring a Cisco device through a console port?
Bits per second: 19200
Data bits: 7
Parity: None
Stop bits: 0
Flow control: None
Bits per second: 9600
Data bits: 8
Parity: None
Stop bits: 1
Flow control: None
Bits per second: 19200
Data bits: 7
Parity: None
Stop bits: 0
Flow control: Hardware
Bits per second: 9600
Data bits: 8
Parity: None
Stop bits: 1
Flow control: Hardware
35. In a packet-switched data network, what is used to reassemble the packets in the correct order at the destination device?
source address
sequence number 
priority assignment
destination address
CCNA 1 Final Exam
36. Refer to the exhibit. A network administrator tries to test the connectivity between routers R1 and R2, but the attempt to ping is unsuccessful. Based on the show ip interface brief command outputs, what could be the possible cause of the problem?
Interface S0/0/0 on router R1 is shut down.
Interface S0/0/0 on router R1 is configured with an incorrect IP address.
Interface S0/0/0 on router R2 is administratively down.
Interface S0/0/0 on router R2 does not have the clock rate settings configured.
37. Which router configuration mode will require user authentication if an administrator issues the enable secret command?
user executive mode
privileged executive mode
global configuration mode
service specific configuration mode
38. Which location of router memory is cleared with the erase startup-config command?
flash
RAM
ROM
NVRAM
39. Which subnet mask should be used for a Class B network that is divided into subnets and will accommodate between 800 hosts and 1000 hosts?
255.255.255.0
255.255.254.0
255.255.252.0
255.255.248.0
255.255.240.0
40. Which two programs can be used to accomplish terminal emulation for configuring a router from the CLI through the console port? (Choose two.)
HyperTerminal
Internet Explorer
Minicom
Secure Shell
Telnet
CCNA 1 Final Exam
41. Refer to the exhibit. The network containing router B is experiencing problems. A network associate has isolated the issue in this network to router B. What action can be preformed to correct the network issue?
issue the clock rate command on interface Serial 0/0/0
issue the description command on interface Serial 0/0/1
issue the ip address command on interface FastEthernet 0/0
issue the no shutdown command on interface FastEthernet 0/1
CCNA 1 Final Exam
42. Refer to the exhibit. A web browser running on host PC1 sends a request for a web page to the web server with an IP address 192.168.1.254/24. What sequence of steps will follow in order to establish the session before data can be exchanged?
The session will be initiated using UDP. No additional acknowledgment will be required to establish the session.
The session will be initiated using TCP. No additional acknowledgment will be required to establish the session.
The session will be initiated using UDP. The returned web page will serve as an acknowledgment for session establishment.
The session will be initiated using TCP. A three-way handshake must be successfully completed before the session is established.
43. Which prompt is associated with the privileged exec mode?
R1>
R1#
R1(config)#
R1(config-router)#
44. A user sees the command prompt: Router(config-if)# . What task can be performed at this mode?
Reload the device.
Perform basic tests.
Configure individual interfaces.
Configure individual terminal lines.
CCNA 1 Final Exam
45. Refer to the exhibit. Interface Fa0/0 on router A is generating excessive broadcast traffic. Which LAN segments will affected by the excessive broadcasts?
Only the 192.168.1.200/30 network will be affected.
Only the link between 192.168.1.201 and port Fa0/5 on SW1 will be affected.
Both the 192.168.1.200/30 and 192.168.1.204/30 networks will be affected.
Only the links between 192.168.1.201 and port Fa0/7 on SW2 will be affected.
46. What is the effect of using the Router# copy running-config startup-config command on a router?
The contents of ROM will change.
The contents of RAM will change.
The contents of NVRAM will change.
The contents of flash will change.
47. Which option represents a point-to-point logical topology diagram?
The correct answer is last image.
CCNA 1 Final Exam
CCNA 1 Final Exam
CCNA 1 Final Exam
CCNA 1 Final Exam
48. In a network design project, a network designer needs to select a device to provide collision free connections to 40 hosts on the LAN. Which device should be selected?
hub
router
switch
firewall
49. Which communication tool allows real-time collaboration?
wiki
e-mail
weblog
instant messaging

CCNA 1 Final 2012 Exam Answers – Set-1

Which of the following are the address ranges of the private IP addresses? (Choose three.)
10.0.0.0 to 10.255.255.255 
200.100.50.0 to 200.100.25.255
150.150.0.0 to 150.150.255.255
172.16.0.0 to 172.31.255.255
192.168.0.0 to 192.168.255.255 

127.16.0.0 to 127.31.255.255
Which two functions of the OSI model occur at layer two? (Choose two.)
physical addressing 
encoding
routing
cabling
media access control
CCNA1 Final Exam 2012
Refer to the exhibit. What function does router RT_A need to provide to allow Internetaccess for hosts in this network?
address translation
DHCP services
ftpd
web server
What is true regarding network layer addressing? (Choose three.)
uses a flat structure
prevent broadcasts
heirarchical
uniquely identifies each host

48 bits in length
contains a network portion
CCNA1 Final Exam 2012
Refer to the exhibit. Host A attempts to establish a TCP/IP session with host C. During this attempt, a frame was captured with the source MAC address 0050.7320.D632 and the destination MAC address 0030.8517.44C4. The packet inside the captured frame has an IP source address 192.168.7.5, and the destination IP address is 192.168.219.24. At which point in the network was this packet captured?
leaving host A
leaving ATL
leaving Dallas 
leaving NYC
CCNA1 Final Exam 2012
Refer to the exhibit. Assume all devices are using default configurations. How many subnets are required to address the topology that is shown?
1
3
4
5
7
technician is asked to secure the privileged EXEC mode of a switch by requiring a password. Which type of password would require this login and be considered the most secure?
console
enable
enable secret 
VTY
CCNA1 Final Exam 2012
Refer to the exhibit. A technician is working on a network problem that requires verification of the router LAN interface. What address should be pinged from this host to confirm that the router interface is operational?
127.0.0.1
192.168.64.196
192.168.254.1 
192.168.254.9
192.168.254.254
Which OSI layer does IP rely on to determine whether packets have been lost and to request retransmission?
application
presentation
session
transport
When connectionless protocols are implemented at the lower layers of the OSI model, what is usually used to acknowledge that the data was received and to request the retransmission of missing data?
IP
UDP
Ethernet
a connectionless acknowledgement
an upper-layer, connection-oriented protocol or service
CCNA1 Final Exam 2012
Refer to the exhibit. Host C is able to ping 127.0.0.1 successfully, but is unable to communicate with hosts A and B in the organization. What is the likely cause of the problem?
Hosts A and B are not on the same subnet as host C.
The IP addresses on the router serial interfaces are wrong.
The subnet mask on host C is improperly configured. 
The FastEthernet interface fa0/0 of router 1 is wrongly configured.
CCNA1 Final Exam 2012
Refer to the exhibit. Which list refers only to end devices?
D,E,F,G
A,H,B,C
A,D,E,F
A,D,E,G
CCNA1 Final Exam 2012
Refer to the exhibit. Host A sends a frame with the destination MAC address as FFFF.FFFF.FFFF. What action will the switch take for this frame?
It will drop the frame.
It will send the frame back to host A.
It will send the frame to all hosts except host A. 
It will forward the frame to the default gateway.
Which subnet mask will allow 2040 hosts per subnet on the IP network 10.0.0.0?
255.255.0.0
255.255.254.0
255.255.252.0
255.255.248.0 
255.255.240.0
255.255.255.128
CCNA1 Final Exam 2012
Refer to the exhibit. RouterB is configured properly. The Ethernet interface Fa0/0 of RouterA is configured with the use of the commands that are shown. However, a ping from the Fa0/0 interface of RouterA to the Fa0/0 interface of RouterB is unsuccessful. What action should be taken on RouterA to solve this problem?
Use the description command on the FastEthernet interface Fa0/0.
Configure the clock rate of the FastEthernet interface Fa0/0.
Use the no shutdown command on the FastEthernet interface Fa0/0. 
Reboot the router.
To send data through a network, what two flags are used to establish a session? (Choose two.)
ACK 
CRC
SYN 
Ack #
Port #
Seq #
Which statement is true about the TTL value of an IPv4 packet?
It determines the priority of a packet.
It specifies the remaining “life” of the packet.
It indicates that the packet has been fragmented.
It denotes the data payload type that the packet is carrying.
CCNA1 Final Exam 2012
Refer to the exhibit. Communication for hosts X and Y is restricted to the local network. What is the reason for this?
Host X is assigned a network address.
Host Y is assigned a multicast address.
Host X and host Y belong to different networks.
The gateway addresses are broadcast addresses.
What type of network is maintained if a server takes no dedicated role in the network?
mainframe
client/server
peer-to-peer
centralized
A routing issue has occurred in your internetwork. Which of the following type of devices should be examined to isolate this error?
access point
host
hub
router 
switch
Which physical component is used to access and perform the initial configuration on a new unconfigured router?
Correct answer is image 2 , CONSOLE !
CCNA1 Final Exam 2012
CCNA1 Final Exam 2012
CCNA1 Final Exam 2012
CCNA1 Final Exam 2012
CCNA1 Final Exam 2012
A user sees the command prompt: Router(config-if)# . What task can be performed at this mode?
Reload the device.
Perform basic tests.
Configure individual interfaces. 
Configure individual terminal lines.
What is the correct order for PDU encapsulation?
Correct answer is first image !
CCNA1 Final Exam 2012
CCNA1 Final Exam 2012
CCNA1 Final Exam 2012
CCNA1 Final Exam 2012
CCNA1 Final Exam 2012
What information can be gathered by using the command netstat?
the default gateway
the routing protocol
active TCP connections
the locally configured subnet mask
How can ARP be used to help document the network?
It can list each hop on the way to a destination host.
It can show the average latency of hosts on the network.
It can provide a list of physical addresses on the network.
It can indicate which hosts are not responding to network traffic.
What is the protocol data unit that is associated with the data link layer of the OSI reference model?
data
frame
packet
segment
Which application layer protocol allows administrators to log into a server from remote locations and control a server as though logged in locally?
DNS
FTP
DHCP
SMTP
Telnet
Which statement identifies the DNS protocol?
It transmits information using TCP port 25.
It transfers and conveys information using HTML pages.
It matches a resource name with the required network address.
It requests and assigns an IP address, default gateway, and server addresses to hosts.
Which password would allow a user to establish a Telnet session with a Cisco device?
VTY password
enable password
console password
enable secret password
Which identifier is contained in the header of the Layer 2 Ethernet frame?
timing and synchronization of bits
source and destination port numbers
logical source and destination addresses
physical source and destination addresses
What happens when a node on an Ethernet network is creating a frame and it does not have the destination MAC address?
The node drops the frame.
The node sends out a Layer 3 broadcast message.
The node sends a message directly to the router for the address.
The node sends out an ARP request with the destination IP address.
An administrator makes changes to the default configuration of a router and saves them to NVRAM. After testing, it is discovered that the configurations did not have the desired effect and must be removed. What steps must be taken to remove the changes and return the router to the default configuration?
Reboot the router.
Use no version of the commands that are issued.
Issue the erase startup-config command, and then reboot the router.
Issue the erase running-config command, and then reboot the router.
A network administrator is tasked with connecting two workgroups that are configured to use different subnets. Which device should be selected to allow connectivity between users on the two networks?
hub
switch
router
wireless access point
Which two programs can be used to accomplish terminal emulation for configuring a router from the CLI through the console port? (Choose two.)
HyperTerminal
Internet Explorer
Minicom
Secure Shell
Telnet
Which statement accurately describes file sharing in a peer-to-peer network?
dedicated server is required.
Access control is decentralized.
Files are typically stored on the most powerful peer in the network.
Peers can either make requests, or respond to requests, but not both.
What are two primary responsibilities of the Ethernet MAC sublayer? (Choose two.)
frame delimiting
data encapsulation
logical addressing
error detection
accessing the media
Which router configuration mode would an administrator use to configure the router for SSH or Telnet login access?
line
router
global
interface
privileged EXEC
CCNA1 Final Exam 2012
Refer to the exhibit. Which device should be included in the network topology to provide Layer 2 connectivity for all LAN devices, provide multiple collision domains, and also provide a connection to the rest of the network?
server
hub
switch
PC
CCNA1 Final Exam 2012
Refer to the exhibit. A technician has been asked to test connectivity from PC1 to a remote network. Which action will indicate if there is remote connectivity?
Correct answer is first image !
CCNA1 Final Exam 2012
CCNA1 Final Exam 2012
CCNA1 Final Exam 2012
CCNA1 Final Exam 2012
What purpose does a hostname serve on a router?
uniquely identifies a router on the internet
used by routing protocols to identify peer routers
provides device identification to users logging on remotely
determines the hosts that are allowed to connect to the device
Which prompt is associated with the privileged exec mode?
R1>
R1#
R1(config)#
R1(config-router)#
A technician wishes to connect two computers to move data from one to the other before reloading the operating system. The NICs on both PCs do not support autosensing feature. Which procedure will satisfy the requirement?
Interconnect the two PCs with a rollover cable.
Interconnect the two PCs with two rollover cables and a hub.
Interconnect the two PCs with a crossover cable.
Interconnest the two PCs with two crossover cables and a hub.
CCNA1 Final Exam 2012
Refer to the exhibit. Interface Fa0/0 on router A is generating excessive broadcast traffic. Which LAN segments will affected by the excessive broadcasts?
Only the 192.168.1.200/30 network will be affected.
Only the link between 192.168.1.201 and port Fa0/5 on SW1 will be affected.
Both the 192.168.1.200/30 and 192.168.1.204/30 networks will be affected.
Only the links between 192.168.1.201 and port Fa0/7 on SW2 will be affected.
Two routers are connected via their serial ports in a lab environment. The routers are configured with valid IP addresses, but they cannot ping each other. The show interface serial0/0 command shows that the serial0/0 interface is up but the line protocol is down. What could be the cause of this problem?
The no shutdown command has not been applied to the interfaces.
The clock rate command has not been entered on the DCE interface.
The interface timers are not cleared.
The FastEthernet interface is emulating a serial interface by assigning it a timing signal.
CCNA1 Final Exam 2012
Refer to the exhibit. Which layered network model is shown in the diagram?
Cisco
IETF
OSI
TCP/IP
CCNA1 Final Exam 2012
Refer to the exhibit. Host A is unable to reach host B on the remote network. A technician attempted to ping the local gateway and the ping was successful. To verify the host configuration, the technician issued the ipconfig command. What is the likely cause of the problem?
The local NIC is incorrectly configured.
The subnet mask on host A is incorrectly configured.
The IP address on host A is incorrectly configured.
The default gateway on host A is incorrectly configured.
Which option shows how a router will route packets to a remote network?
Correct answer is image 4 !
CCNA1 Final Exam 2012
CCNA1 Final Exam 2012
CCNA1 Final Exam 2012
CCNA1 Final Exam 2012
An organization has been assigned network ID 10.10.128.0 and subnet mask 255.255.224.0. Which IP address range can be used for this organization?
10.10.128.0 to 10.10.160.255
10.10.128.0 to 10.10.159.255
10.10.128.0 to 10.10.192.255
10.10.128.0 to 10.10.0.159
10.10.128.0 to 10.10.159.0
A network administrator is configuring several switches for a network. The switches have similar configurations and only minor differences. The administrator wants to save all commands that are issued on the first switch to a text file for editing. Which transfer option should be selected in HyperTerminal?
Correct answer is image 3, CAPTURE TEXT !
CCNA1 Final Exam 2012
CCNA1 Final Exam 2012
CCNA1 Final Exam 2012
CCNA1 Final Exam 2012